GS-8Y

Present Location:  Bottle blowing machine

  • Name: GS-8Y
    Category: Bottle blowing machine

    Detail

    GS-8Y Semi-automatic bottle blow molding machine

    Features:

    *Its suitable for producing PET plastic containers and bottles from 0.1L to 2L. It is widely used to produce the carbonated bottle, mineral water bottle, pesticide bottle, oil bottle, cosmetics bottle, wide-mouth bottle etc. 

    *Adopting infrared oven to heat the preform, the preform can be rotated and heated equally.

    *The air system has been divided into two parts: pneumatic action part and bottle blowing part to meet the different requirements for the action and blowing. It can provide sufficient and steady high pressure for blowing large irregular  shaped bottles.

    *The machine is also equipped with muffler and oiling system to lubricate the  mechanical part of the machine.

    *The machine can be operated in manual mode and semi-auto mode.

    *Low investment, easy & safe operation

    Specifications:

    Model Item Unit GS-8Y
    Container Product material / PET
    Volume L 0.1-2
    Theoretical output pcs/h 1400-1800
    Preform length mm ≤350
    Preform inner diameter mm ≥φ12
    Mould Max.mould plate Diameter(L*W) mm 350*380
    Max.mould thickness mm 210
    Mould opening stroke mm 160
    Machine size and Weight Main machine (L*W*H) cm 1600*600*1610
    Main machine weight kg 500
    Heater (L* W*H) cm 1870*630*1450
    Heater weight kg 250
    Power kw 17.5



    GS-8Y-H Semi-Automatic HOT FILLING Blow Molding Machine

    Features:
    After years practical experiences, this new concept hot filling bottle blow moulding machine is suitable for hot filling drinks such as juice, tea, coffee and sports drinks, as well as pasteurization products

    Specifications:

    Model Item Unit GS-8Y-H
    Container Product material / PET
    Volume L 0.1-1.5
    Theoretical output pcs/h 800-1000
    Preform length mm ≤280
    Preform inner diameter mm ≥φ12
    Mould Max.mould plate Diameter(L*W) mm 350*380
    Max.mould thickness mm 210
    Mould opening stroke mm 160
    Machine size and Weight Main machine (L*W*H) cm 1600*600*1610
    Main machine weight kg 500
    Heater (L* W*H) cm 1870*630*1450
    Heater weight kg 250
    Power kw 24.8

    Back